Powered By Blogger

Friday 30 January 2015

Commercial Building Water Main Manifold

This is the incoming water supply in the basement of a commercial premises in Liverpool city centre. It is 108mm copper pipe. There was a further 1 metre section of 108mm copper connected to the outlet of the gate valve which we disconnected. The cost to join onto this large bore copper tube with copper or brass fittings was prohibitive so we had to come up with an alternative solution.

 The building is getting divided up into office units on the upper floor and a restaurant on the ground floor. Each unit will need its own metered water supply. This manifold kit by Plasson proved the perfect solution.

Add caption

Add caption
Add caption
If you have any queries regarding commercial water supplies please don't hesitate to contact us.

We've recently routed the outgoing pipework from this manifold to the five units within the building

It's been done in continuous lengths using 22mm Tectite metal pipe with just some copper by the meters.